Tools

Functions: SV valve core, SV valve extension, AV valve core."

The perfect helper for emergencies on the road: The Schwalbe SOS Pump is small, handy and extremely stable. It is only 12.9 cm short and therefore either fits in any jersey pocket or can be attached directly to the frame; it is also suitable for tubeless. A frame holder is included. A smart detail is the twist-lock pump handle. When inflating, it is clamped directly to the valve and not screwed on. This prevents wear and ensures a high level of tightness. An additional seal prevents dirt from getting into the SOS Pump. The anodized surface gives the aluminium pump a high-quality design.Bikers on road bikes, gravel bikes or mountain bikes can go on tour with even more peace of mind with the SOS Pump - if an emergency occurs, they are perfectly equipped. Pumping capacity: 85 PSI / 6 barLength: 12.9 cmCompatible valve types: Sclaverand  valve (SV), auto valve (AV)Suitable for tubeless mountingHigh pressure (HP) or volume filling (HV)

Practical set for replacing lost spikes.With 50 steel spikes and a specially developed insertion tool.

With the TIRE BOOSTER, tubeless tires can be fitted safely. Even without a compressor. With the power of up to 11 bar pressure. 435 g light. With the practical mounting strap, the Tire Booster can be attached directly to the floor pump. This also keeps the workshop tidy at all times.Note: Only for SV valves.

Easy play when changing tires. The shape and surface of the tire lever makes mounting and demounting a tire extremely comfortable.The Schwalbe tire lever is particularly helpful for difficult mounting processes. mounting processes. You can clip it onto the rim and use it to remove the already mounted area of the tire bead. The bead then no longer slips out no longer slip out while the last section is levered over the rim. is levered over the rim.Available in a practical set of 3 (The color blue is a trademark of PARKTOOL for bicycle tools and is used under license.)

The Tread Cutter is the first tread cutter designed specifically for MTB tires. It can be used to cut off studs precisely, with a smooth edge and - thanks to the cutting height adjustment - at the desired height. The Tread Cutter is designed for absolute fine-tuning of the tire tread in order to adapt a tire even more optimally to unusual situations.The idea for this special tool was born in the Downhill World Cup and was then further developed together with the tool manufacturer Unior Tools